The Electro Oxidation methodologies solve the problem of the final disposal of sludge; because when they are well developed, there is no production of sludge. Obviously, not always is possible the complete mineralization of contaminates. [More]

Electrochemical oxidation is considered a robust technology and is easy to use, for those reasons, it has been used for a diversity of wastewater treatments. The main advantages of this technology over other conventional treatments are as follows: the main reagent is the electron; many processes occur in the electrochemical cell; the addition of chemicals is not required; and the process is carried out at room temperature and atmospheric pressure. [More]

Electro-oxidation (EO), also known as anodic oxidation, is a technique used for wastewater treatment, mainly for industrial effluents, and is a type of advanced oxidation process (AOP [More]

Engineers derived a statistic analysis using The Electrolytic design for surface response analysis using electrochemical sedimentation. Having considered current density, pH, and electrolysis design, the authors were capable of studying the effects of COD, turbidity, TS removal, and sludge settling with aluminum electrodes, Ferrous Electrodes, Titanium electrodes, etc. [More]

Tiaano manufacturing a machine ‘Chloro-Sanitizer Generator’ which will produce concentrated sodium hypochlorite based sanitizing solution (disinfectant) at site, from common edible salt. Sodium hypochlorite is an effective disinfectant for broad application. [More]

Electro coagulation-electro floatation (ECF) technology is a treatment process of applying electrical current to treat and flocculate contaminants without having to add coagulations. It occurs with the current being applied, capable of removing small particles since direct current applied, setting them into motion. Also electro coagulation could reduce residue for waste production. [More]

When this happens, the particulates are neutralized by the formation of hydroxide complexes for the purpose of forming agglomerates. These agglomerates begin to form at the bottom of the tank and can be siphen out through filtration [More]

The use of a Central Composite Design for the optimization. Arslen-Alton et al. concluded that the central composite design was used to optimize CI Acid Blue 193 treatment by electrocoagulation. The central composite design is capable of achieving maximum color, COD, TOC, by manipulating the COD, pH, electrical current density, and treatment time by means of a response surface quadratic model [9]. Cora and Hung were able to remove metallic ions between 90 and 99% after 30 minutes of treatment using an electrocoagulation/electrofiltration with a pH of 9.5 and cadmium chloride for the metallic ions [10]. [More]

During Flocculation, the particulates are neutralized by the formation of hydroxide complexes for the purpose of forming agglomerates. These agglomerates begin to form at the bottom of the tank and can be siphen out through filtration. However, when one considers an electro coagulation-flotation apparatus, the particulates would instead float to the top of the tank by means of formed hydrogen bubbles that are created from the anode. The floated particulates can be skimmed from the top of the tank [More]

Electro coagulation-electro floatation (ECF) technology is a treatment process of applying electrical current to treat and flocculate contaminants without having to add coagulations. It occurs with the current being applied, capable of removing small particles since direct current applied, setting them into motion. Also electro coagulation could reduce residue for waste production. [More]