Tiaano: Electrochlorinators, Electrolyzers, Chlorine Generator, Swimming Pool Chlorinator, Water Treatment, Biofouling, Saltwater, Titanium Electrodes for Electrochlorination

#48, Noothanchary, Madambakkam, Chennai - 600 073, India Phone: +91 44 22781148 Fax: +91 44 22781362 Email: info@tianode.com Web: www.tiaano.com

RAWMATERIAL & SPECFIFICATION

The generation of sodium hypochlorite requires only:

Seawater + Electricity / Fresh Water + Salt + Electricity

The following table shows the consumption of a typical plate electrolyser when generating hypo containing 1kg of available chlorine:

DESCRIPTION	SEA WATER SYSTEM (2,000 PPM)	FRESH WATER + SALT SYSTEM (8,000 PPM ą0.05%)
Electricity	4.2 kWh (AC)	5.5 kWh (AC) for DC rectifier and other electric equipments
Water	500 liters seawater	125 liters Potable water; 4.0 bar (max); 18 to 27°C
Salt	No salt required	3.5 kg salt (99.7% pure dry weight Morton crystal or equivalent)
Brine Tank	Not required	HDPE or FRP tank to store minimum of 1 weeks supply
Heating / Cooling	Water heater is required (if necessary)	Water chiller is required (if necessary)
Electrical power for rectifier & control panel	Single phase / Three phase
Sodium hypo chlorite tank	HDPE or FRP, one day storage recommended
Hydrogen vent	Waste hydrogen is exhausted to atmosphere by an active air dilution blower system
Level control	Ultrasonic or mechanical level sensor in tank controls start / stop function of system
Operator interface	Provided relay control. PLC will be provided on request. LCD touch screen will be optional
Control panel	Ex (e) / Ex (d). Automatic batch, regulated by storage tank status

Brochures