Water Sanitation


Electrode Assembly for the application of Generation of Sodium Hypochlorite as disinfectant

clock February 16, 2021 15:06 by author admin
Available chlorine capacity of 6.25 GPH to 100 Grams per batch for the application of generation of Sodium hypochlorite. [More]

Supply of Electrode Assembly for the Generation of Sodium Hypochlorite as Disinfectant

clock December 22, 2020 11:12 by author admin
We, Tiaano do fabrication, supply of electrode assembly for the generation of sodium hypochlorite as disinfectant. Available chlorine capacity of 10 GPH to 1000 Grams. / Hr. for general application. Higher capacity with multifold cell assembly [more than 1250 kg/hr.] for industrial / commercial application. [More]

Supply of Electrolyzer 100 GPH for the Generation of Sodium Hypochlorite

clock December 18, 2020 12:12 by author admin
Tiaano, design and manufacturing Batch Type Electro Chlorinators, Titanium Electrolyzers and Titanium Electrode assembly for water treatment application with different cell arrangement. There are Parallel Plate Electrode (PPE), Concentric Tube Electrode (CTE) and Parallel Plate and Mesh Electrodes (PPME). [More]

Fabrication & Supply of MMO Coated Mesh Anode & Platinized Titanium Mesh Anode

clock December 16, 2020 16:11 by author admin
Tiaano manufacturing Iridium Based MMO coated Titanium mesh Anodes and Platinized Titanium mesh Anodes. These anodes are mostly suitable for the electro plating of precious metals like gold, platinum, palladium, chromium, nickel, rhodium and copper etc… [More]


clock November 29, 2020 17:15 by author admin
Primary Treatment After the removal of gross solids, gritty materials and excessive quantities of oil and grease, the next step is to remove the remaining suspended solids as much as possible. This step is aimed at reducing the strength of the waste water and also to facilitate secondary treatment. Screening: Coarse suspended matters such as rags, pieces of fabric, fibres, yarns and lint are removed. Bar screens and mechanically cleaned fine screens remove most of the fibres. The suspended fibres have to be removed prior to secondary biological treatment; otherwise they may affect the secondary treatment system. They are reported to clog trickling filters, seals or carbon beads. Sedimentation: The suspended matter in textile effluent can be removed efficiently and economically by sedimentation. This process is particularly useful for treatment of wastes containing high percentage of settable solids or when the waste is subjected to combined treatment with sewage. The sedimentation tanks are designed to enable smaller and lighter particles to settle under gravity. The most common equipment used includes horizontal flow sedimentation tanks and centre-feed circular clarifiers. The settled sludge is removed from the sedimentation tanks by mechanical scrapping into hoppers and pumping it out subsequently. Equalization: Effluent streams are collected into sump pit. Sometimes mixed effluents are stirred by rotating agitators or by blowing compressed air from below. The pit has a conical bottom for enhancing the settling of solid particles. [More]

MMO Coated Mesh & Negative Mesh for the Generation of Sodium Hypochlorite

clock September 14, 2020 17:12 by author admin
We Tiaano do fabrication & supply of MMO Coated Mesh & Negative Mesh for the generation of Sodium hypochlorite. We have vast experience in the field of making all kind of MMO coated and Platinum plated anodes. [More]

MMO coated Anode & Titanium Cathode for the generation of Sodium hypochlorite

clock September 8, 2020 13:13 by author admin
Tiaano, a complete design and manufacturing company launched a disinfection system called Chloro-Sanitizer Generator for the generation of Sodium Hypochlorite. [More]

Chloro-Sanitizer Generator Skid Assembly for Generation of Sodium Hypochlorite

clock August 11, 2020 17:45 by author admin
We Tiaano design, manufacturing & supplying Chloro-Sanitizer Generator for generation of sodium hypochlorite as disinfect at site by using common edible salt to kill the Covid-19 virus. [More]


clock August 5, 2020 21:31 by author admin
Electro Coagulation Reactor (ECR) consists of electrodes, which is arranged in anode & cathode. Using the principles of electrochemistry, the cathode is oxidized (loses electrons), while the water is reduced (gains electrons), thereby making the wastewater better treated. [More]


clock July 31, 2020 19:05 by author admin
Electrocoagulation-flotation is an alternative method to classic chemical coagulation for many reasons. ECF is capable of reducing the need for chemicals due to the fact that the electrodes provide the coagulant. However, many individuals still use chemical coagulants to attempt to enhance treatment. Traditionally, chemical coagulation involves the use of alum (aluminum sulfate), ferric chloride (FeCl3), or ferrous sulfate (Fe2SO4) which can be very expensive depending on the volume of water treated. When applying the coagulant, the coagulant performs a similar function as the electrodes, neutralizing the charge of the particulates, thereby allow them to agglomerate and settle at the bottom of the tank. In addition, electrocoagulation-flotation is capable of reducing waste production from wastewater treatment and also reduces the time necessary for treatment. [More]

Category list

Sign In